Siemens Encoder Class 2.2 HOMING

aub

Member
A
Join Date
Apr 2011
Location
Gauteng
Posts
1
Hi Guys,
Could someone help me regards to Homing/Zeroing the Encoder through software(Step7) i need to know how its done i can't seem to get it right.
Its basically a Siemens profibus encoder connected to a Siemens S7-300 PLC.👨🏻‍🏫
 

Similar Topics

A
Siemens drive and Encoder issue
On my machine we have MicroMaster 6SE6400-1PB00-0AA0 running a motor with a Siemens 6FX2001-5QP24 encoder. Everything was working fine and then...
Replies
0
Views
291
Aderaleau
A
D
Lost connection to Encoder Siemens
Good afternoon! Please help, the following situation happened: Connected encoder Siemens 6FX2001-5QN25 with Profinet IO to PLC S7-1200. The...
Replies
1
Views
1,100
baref00t25
B
P
Siemens TM PosInput1 and absolute encoder
Hello to you all! I hope there is someone who can clarify some things to me..... Equipment used: TM PosInput1 (6ES7138-6BA00-0BA0) to read the...
Replies
0
Views
1,263
pisoj
P
J
Siemens TTL/RS422 Encoder wiring to TM_Posinput?
Hi, Im a bit unsure about how to connect my SIEMENS encoder (5V TTL/RS422) To my baseunit (The light one).. I have attached a pic of how i have...
Replies
2
Views
1,526
Jim.M
J
C
Encoder Issue (Siemens Step 7 FM350-1)
Hi All, First time I have ever worked with encoders and I am having a slight issue. The encoder is set up counts up and down and works well for...
Replies
2
Views
2,028
JesperMP
JesperMP
Back
Top Bottom