Has anyone any experience with the low priced fiberscopes? One use I would have right away would be to examine the dip switches for the settings in a place I can't quite get close enough to read. If you can recommend one up to about $300, let me know.
Borescope / Fiberscope / Inspection Camera
- Thread starter VJTX
- Start date
ELake20
Lifetime Supporting Member
This one isn't bad
http://www.denlorstools.com/home/dt...ics_vs36_10ww_vo_scope_inspection_stik_f.html
They also sell one at Home Depot, its a Milwaukee brand I think its this one?
http://www.amazon.com/Milwaukee-2300-20-M-Spector-Digital-Inspection/dp/B001AOVBHG
http://www.denlorstools.com/home/dt...ics_vs36_10ww_vo_scope_inspection_stik_f.html
They also sell one at Home Depot, its a Milwaukee brand I think its this one?
http://www.amazon.com/Milwaukee-2300-20-M-Spector-Digital-Inspection/dp/B001AOVBHG
Similar Topics
Good morning guys, I'm searching to find a product that can inspect the width and depth of a keyway on the end of shaft. Width is 1/4" ±.001...
Hi All,
I'm doing mainly PLC programming but dabbling in industrial networking.
I am investigating an intermittent communication fault between a...
Hello,
I have been shopping around for a while, seems like alot of them will only inspect a small area. What I want to do is inspect a loading...
Hi Group
My control box uses 110VAC incoming from customer supply. It has a PLC and a DC power supply both running on 110.
The PLC draws 0.8...
Could someone suggest any instrumentation to internally view non conductive material? Example : Validate a centered wick in a candle internally...