I'm using the DVP32ES200. Programming and functionality is easy and quick. I have a few problems though. It is only a 16 bit machine and I cant figutre out how to use their 32 bit representation. It says something about how it can be used but everytime I try it seems to ignore the firsdt 16 bits and leave me a number in the trillions. Simple addition of 1 such as daddr d500 F1 d500 give a value of K1065353216. What is going on here?
DVP 32 signing problem
- Thread starter roro36
- Start date
Similar Topics
Good Day to all of you, this is my first post, i will try to explain as best as possible, english is not my natural language. I am performing an...
Hey guys,
I've a requirement that a two different PLC program should work in same system depending upon user input.
Consider Program A is used...
Hello,
I'm facing a problem in communication between my delta TP70P-32TP1R HMI and DVP20EX2 PLC. I tried multiple ways in order to set the...
Hi all!
I need help help with my delta module.
Model : DVP-06XA-S
Firmwire : 4.08
When i was setting my Rs485 parameter i...
Hello, someone know how to configure this PLC (DELTA DVP-14SS2) In the COM2 modbus RTU 485 baud rate 9600 8E1 slave mode (Not the plc Link)...