Current Resolution on Kinetix Drive

tspisak

Member
T
Join Date
Aug 2005
Location
Corning, NY
Posts
72
Does anyone know (or have one to look at) accuracy (resolution) of the MotorCurrent on a Kinetix Servo Drive (2 or 4A version) hooked to a ControlLogix based PLC?

I need to have precise motor load feedback for my project since the difference between a loaded motor and unloaded is very slight.

I'm worried that the current values running in free air will wander in too large a band to see any measurable difference when the motor engages it's light load.
 

Similar Topics

J
Too much current into PLC
Today I was working on my project for school and we were using a power supply with 24V and we accidentally had the current at 0.9A. We heard a pop...
Replies
9
Views
547
danw
danw
afm
Current Meter Recommendations
Hi all, I have been working on a project that requires me to measure the current across a 90 VDC motor of a medical device (similar to an...
2
Replies
26
Views
1,528
afm
afm
A
VFD won't accept my motor rated current
HI i have a delta VFD M-series in the manual, in order to enter the motor rated current you set the parameter P,52 =the motor rated current my...
Replies
7
Views
665
alan_505
A
E
SFC IN STUDIO 5000 name current Step
HI! HOW COULD I OBTAIN THE NAMES OF THE STEPS OF A ROUTINE IN SFC LANGUAGE IN STUDIO5000? Or is there a system variable that gives me those...
Replies
0
Views
339
edgardany2k
E
K
KEB-VFD is not tripping at higher current
VFD is not tripping at higher current , resulting in motor failure . VFD Model : Make - KEB Type - H6- 10H6BBBB-21B0
Replies
2
Views
510
5618
5618
Back
Top Bottom