connecting proface gp270 to mistu FX0N

mtchufi

Member
M
Join Date
Dec 2003
Posts
5
Dear Reader,
I have a panel interface PRO-FACE GP270L, I want to Learn how it work and communicate with PLC.
I also have a Mitsu FX0N-40MR in my desk.
1. Can I connect this panel interface with my PLC (Mitsu), how?
2. Please give me simple program, ie to start and stop a motor.
I also have the cable for interfacing between the PLC and Panel face (RS422 to RS 232).
thanks
 

Similar Topics

S
Siemen 226 CPU NG connecting Proface
Hi, Had anyone Have this problem, where the Siemen 226 CPU (s7 200CN) 6ES7 216 2BD23 0XB8 disconnect the Proface Model 3580207-02...
Replies
0
Views
1,198
sttchui
S
A
Connecting Proface AGP3302-B to S7-224XP PLC
Hi all. I have done a search of the forum and couldn't find any information on this subject. I need to connect an AGP3302-B to a S7-224XP. I was...
Replies
1
Views
2,852
Crossbow
Crossbow
T
PLC Delta DVP 12SE and HMI Kinco GL043E not propperly connecting
Good Day to all of you, this is my first post, i will try to explain as best as possible, english is not my natural language. I am performing an...
Replies
0
Views
36
Tecnolaundry
T
J
Connecting a Micrologix 1500 to a PanelView Plus 7
I have been working on this for a while now and I can't seem to get it. I was finally able to view the 1500 on the PanelView under the serial...
Replies
1
Views
82
jscampbell210
J
K
Connecting FactoryTalk Datalog to MariaDB
Hello, I was looking to store some values from our FactoryTalk Application using Datalog to a MariaDB. I see there is quite a bit of documentation...
Replies
1
Views
92
drbitboy
drbitboy
Back
Top Bottom