HMI Problem

arocon

Member
A
Join Date
Oct 2006
Location
Dubai
Posts
171
i am using HMI which is created on visual basic with siemens S7 300 PLC. whenever i put a value in HMI it is going to be 100 times. Could anyone tell me where could be problem.

Thank you
 

Similar Topics

M
Omron CQM1H to NS8 HMI, Problem
I have an Omron CQM1H-CPU21 and a NS8-TV00B-V1, I have followed the manufacturer's spec on how to set this up and all I got is the HMI is trying...
Replies
7
Views
873
IO_Rack
IO_Rack
S
Hmi input field format problem
Hi guys I have a system of mp277 key hmi, s7-300 plc Hmi has damage, so I bought weintek hmi to replace it I have the cpu program so I got the...
Replies
3
Views
1,093
Some one
S
A
HMI Communication to PLC Problem
Hello I hope someone could help. I have installed Intouch 2014 R2 on a new HMI, Loaded the Intouch Project, Load DB, Configure the DAServer...
Replies
0
Views
1,469
a_rishi
A
H
communication problem after change hmi device in wincc flexible 2008 project
I have wincc flex 2008 project made with wincc flexible 2088 sp1 project hmi device is simatic pc panel 19" I want to change hmi device to run the...
2
Replies
17
Views
5,282
mk42
M
J
Omron to HMI communication problem.
I have a Omron CP1L PLC that I'm having problems communicating with a NS5-SQ11B-V2 Omron HMI through ethernet . I have the exact same set up on...
Replies
3
Views
2,084
Jeffwiley
J
Back
Top Bottom