arocon Member A Join Date Oct 2006 Location Dubai Posts 171 May 8, 2011 #1 In our HMI, one messege is poping up 'PLC and HMI parameter not same'. Could anyone tell me where is the problem. We are using the siemens s7 300 PLC. Where is the initial data is saving in PLC. thank you
In our HMI, one messege is poping up 'PLC and HMI parameter not same'. Could anyone tell me where is the problem. We are using the siemens s7 300 PLC. Where is the initial data is saving in PLC. thank you
silva.foxx Member Join Date Dec 2004 Location North Wales; always West to England! Posts 519 May 9, 2011 #2 You'll need to access the HMI program via software or hard copy of documentation to find what triggers that message.
You'll need to access the HMI program via software or hard copy of documentation to find what triggers that message.