c1000h comm. cable?

lacruth

Member
L
Join Date
Jul 2008
Location
mexicali
Posts
41
I have an old c1000h plc, I have the interface adapter c120-lk201-ev1, anybody knows if the cable pinout i have is good for them? I have db9 to db 25(2 to 2, 3 to 3, 5 to 7, and db9 short 4&6 and 7&8, db25 short 4&5)

thanks
 
Last edited:
lacruth said:
I have an old c1000h plc, I have the interface adapter c120-lk201-ev1, anybody knows if the cable pinout i have is good for them? I have db9 to db 25(2 to 2, 3 to 3, 5 to 7, and db9 short 4&6 and 7&8, db25 short 4&5)

thanks
Click to expand...
software I have is cx-programer ver. 8.1
 
Cable pinout is correct.
CX-Programmer appears to support the C1000H.

Just verify the switch settings on the Host Link and make sure they match the comm settings in CX-P.

Good Luck.
 

Similar Topics

H
Omron C1000H Memory Error
I have an Omron C1000H CPU in fault for "memory error". I first re-seated the memory module (C2000-MR34-V2) and re-loaded the program. I cycled...
Replies
1
Views
2,878
BobB
BobB
C
omron c1000h password
does any one know how to get around an unknown password for a omron c1000hcpu01e2 used using the programming module clr--monitor--clear does...
Replies
3
Views
1,958
gtsuport
G
K
Omron PLC Model C1000H
Hi Friends, We are facing CPU ERR problem in the Omron PLC of Model C1000H. Anybody can suggest me to resolve the problem. Regards, K.Vajravelu
Replies
3
Views
1,925
gtsuport
G
N
I need manual AD and DA Of PLC C1000H Omron
I need manual AD and DA Of PLC C1000H Omron
Replies
0
Views
23
nuttaphong191
N
F
Omron c1000h Unknown PLC in Syswin
I'm working on a Omron C1000H that has a RS232 card C500-LK203 mounted to it. When I try to connect using SYSWIN it allows me to connect but says...
Replies
7
Views
6,009
gtsuport
G
Back
Top Bottom