WinCC & PC Adapter

hagos

Member
H
Join Date
Oct 2004
Location
Africa
Posts
244
Dear Folks,

Can WinCC communicate using PC Adapter using MPI?
I appreciate if any of you who might have tried that to tell me how.

Regards
Hagos
 

Similar Topics

P
A WinCC connection issue using an USB/DP Adapter.
Ok, hold on tight because here comes *another* noob question. I have a laptop, Siemens USB/DP Adapter (6ES7 972-0CB20-0XA0), a profi network...
Replies
9
Views
5,474
tomhelliwell
tomhelliwell
E
WinCC v6 with PC-Adapter ???
Hello, I know that i can connect a PC with WinCC Flexible to my S7-300 plc by using a Serial PC Adapter. My question is, it is possible with...
Replies
5
Views
6,616
dchartier
D
B
HMI GRAPHICS MISSING_WINCC UNIFIED V18.UPD3
Does anyone happen to know how to install the graphic picture in HMI when I go into blower selection there are no graphics shown not only blower...
Replies
1
Views
63
Jkoso
J
P
WinCC RT Advanced - Data Logging Memory
Hi folks, I'm not as accustom with Siemens & WinCC, however I've been asked to increase the amount of data an existing application is logging...
Replies
2
Views
65
Plantationpark
P
A
WinCC Unified and PLC weird communication issue
I have created a project in TIA Portal v16 Upd6 with S7-1200 (6ES7214-1AG40-0XB0) and WinCC Unified (PC station). The communication between the...
Replies
4
Views
145
mk42
M
Back
Top Bottom