Ictd?

Integrated Circuit Temperature Device.

I have to connect five of these doo-dads to PLC 4-20mA inputs, but I am not having any luck finding information about the electrical characteristics or any signal conditioners.

I put a call into the mfg. (Frick) but had to leave a message hopefully they'll call me back.

Has anyone used these before? I have only used RTD and thermocouple inputs so this is a new one for me.

Thanks,
Paul

I'm getting Analog Devices AD590. Datasheet with conditioning examples.
Something from Frick that leads me to believe it's a AD590. it takes you straight to a PDF. If that doesn't work, Google "ictd temperature" and go to the 3rd link on page 2.

keithkyll said:

I'm getting Analog Devices AD590. Datasheet with conditioning examples.
Something from Frick that leads me to believe it's a AD590. it takes you straight to a PDF. If that doesn't work, Google "ictd temperature" and go to the 3rd link on page 2.

Click to expand...

Yep, AD590 appears on the cutsheet from Frick (York). The sheet says "TEMPERATURE WORKING RANGE -55C TO 150C"

The properties on on the AD590 data sheet in your link should be enough for me to figure out what I need to buy. Thanks, guys!