RSLogix Emulate 500

RSLogix Emulate 500 only works to emulate processors SLC 500 and PLC-5 ?

I can emulate a Micrologix 1500?

Thanks in advance...

I believe it also works with all the Micrologix. Mine works fine emulating a 1200. Although Im using a fairly old version of RSLogix.

We use emulate for the micrologix series here,
but i was not the one to set it up.
regards,
james

Thanks, I found this on the help of the program:

Support for the following processors has been added to RSLogix Emulate 500:

1747-L532F - 5/03 - 16K Memory 1747-OS302 Series C
1747-L531F - 5/03 - 8K Memory 1747-OS302 Series C
1747-L541D - 5/04 - 12K Memory 1747-OS401 Series C
1747-L542D - 5/04 - 28K Memory 1747-OS401 Series C
1747-L543D - 5/04 - 60K Memory 1747-OS401 Series C
1747-L551 - 5/05 - 16K Memory 1747-OS501 Series C
1747-L552 - 5/05 - 32K Memory 1747-OS501 Series C
1747-L553 - 5/05 - 64K Memory 1747-OS501 Series C
MicroLogix 1200 Series A
MicroLogix 1200 Series B
MicroLogix 1500 Series A
MicroLogix 1500 Series B
MicroLogix 1500 R2 Series B

Correction. You need RSEmute 5 for PLC5 processors.

Just tried it with a 1500 series C and it also works fine.

I use the SLC 500 Emulator driver in RSLinx.

Check this post!
http://www.plctalk.net/qanda/showthread.php?t=80809