sms read

hello everyone,


please help me to read sms from gsm using rslogix500...plz give some demo code...

Kpp,

Try searching the forum...plenty of info if you look! Or start here if it helps...

Regards

Rob

thanks...

thanks...i will try and reply to you..

kidblue,

i have tried to download the demo coed but it will shows the unexpected format message. secondly i can sent the message using AWT instruction but when i am trying to read message using ARD instruction it shows error 09h.
Setting done in micrologix is as below:
1. Channel configuration is Df1 full duplex
2. baud rate 9600
3. parity- none
4. control line- no handshaking
5. error detection- crc
6. embeded respose- auto detected

please help me as soon as possible

hello everyone.......

i have tried the demo code.
but i didn't get success as i tried to read sms but plc can't read it......i didn't get the rec unread string.....

pleas help me.....

thanks.........

Remotely Access PLC using GSM

How I can access AB PLC Remotely?
-Using One GSM at PLC side and another one at LAPTOP side.
-Seetings I have to do in RSLinx?
-Program code for PLC?
-SIM CARD facility

Please Help...ASAP...