Hi, I have a pair of MDS TransNet 900, One is set as master, and another is set as remote, I use Hyper Terminal on two computer to test the radio communication, Data can only go from A Radio to B Radio, no matter A is Master/B is Remoter, or A is Remote /B is master. But the TxD/Rxd on A/B are both light on/off correctly, What cause this probleum? Thanks,
MDS TransNet 900 troubleshooting?
- Thread starter wilsonzhu
- Start date
I think the remote will automacitally sync with master, do we need set Rx and Tx frequency seperately? if so how to set it up?
Similar Topics
Hi, I am an E&I Tech for an oil company in Wyoming. I'm in the process of changing all of my RTU radio's to MDS Transnet 900. I have about 350...
Hi everyone. My customer tell us to check their MDS-A-CR-75 that I have find some manual for a while but not found it. Are there anyone have...
Hi all,
Got my first proper foray into servo drives coming up. I have an application where two conveyors need to speed match exactly to avoid...
Has anyone had experience using UHF (451/456MHz) Ethernet Radios to successfully MSG between Allen-Bradley PLCs (SLC 5/05 and ML1100s)? The system...
Hi guys, I have a client who has MDS 9810 radios for their water system telemetry. I got a call today from them, saying they think the master...