Question about reversing servo direction on Mitsubishi MR-J2S-40A

daveinarmstrong

Member
D
Join Date
Oct 2007
Location
Armstrong
Posts
4
I have replaced a drive a Mitsubishi MR-J2S-40A servo drive and now the servo is going in the wrong direction. instead of editing the code, i would like to just change 2 of the 3 wires to the servo. is it advisable on this type of servo drive?
Thanks in advance for your help.
 

Similar Topics

P
Hello! I have a question about HMI 2711R
I have an HMI 2711R - T4T Series B, and I want to know which PLCs, besides Micro 820, can communicate with it.
Replies
2
Views
61
plc_siamens
P
J
PLC SIMATIC S7 1200 / KOP/SCL question
HI i would like to know how to get a variable that will store the amount of times a program has been executed. The issue is I have 3 DBs for 1 FB...
Replies
2
Views
63
jimix
J
T
Rockwell Structure text Question
I'm working with a project that contains some routines in ST but mostly in ladder. Am I correct in assuming this 'rung': DB1001DO._01AV55_OPEN :=...
Replies
4
Views
100
toddp65
T
jimtech67
RS Logix BackUp silly question
Is there a way to reset the count on the RS Logix BackUp?? XXXXX PROGRAM IN PROGRESS_BAK445.RSS XXXXX PROGRAM IN PROGRESS_BAK446.RSS XXXXX...
Replies
8
Views
252
joseph_e2
J
B
can you run studio 5000 on an external drive? question on storage.
I have a few questions about Studio5000. 1. Why is my RA folder so big? its well over 100 GB. 2. How do you delete versions or extra files...
Replies
3
Views
272
robertmee
R
Back
Top Bottom