FX-3uEnet to Scada on Modbus

Tushar_1234

Member
T
Join Date
Mar 2011
Location
asdgsd
Posts
5
Dear All

I am using Mitshubishi FX-3U Enet module for communicating with scada on modbus platform first time

Any one have sample program of PLC or How to do it


It's very urgent

Regards

Tushar
 

Similar Topics

A
Help with Mitsubishi FX3u-48M and FX3uENET Module
I have a FX3u-48M PLC with a FX2n-16EX card, FX3u-4AD and then a FX3u-ENET I am trying to put this processor on our network I have configured the...
Replies
1
Views
3,673
asimpswi
A
P
Tag not working in scada application
Has anyone ever seen where you have a tag reading from the plc in scada. In this instance it's just a PEC, I set it up on one scada terminal and...
Replies
0
Views
87
petehannon007
P
P
Wonderware intouch scada
Hi guys, I have experience with PLC to Excel etc...just starting on using intouch scada screens. I have an Excel sheet that uses mainly...
Replies
1
Views
134
NetNathan
N
A
AVEVA Plant Scada not "in use" in Liscense Activation Manager
Hello guys, I would need some help. I have installed the aveva plant scada and want to run a project. From the configurator, all are fine, as I...
Replies
0
Views
100
Aimin Ariff
A
A
WinCC SCADA to the S7-PLC cross-subnet communication?
Is it possible to connect a PC with running WinCC Advanced or Unified to a siemens PLC such as S7-1200 across different subnets? The computers can...
Replies
0
Views
83
aamirawan91
A
Back
Top Bottom