how to use s7200 Receive RS485 ASCII

tid_champ

Member
T
Join Date
Mar 2011
Location
bkk
Posts
30
hello
i have analyzer it out put port rs485 protocol ASCII
i want use s7 200 CPU 224 XP Receive Data From analyzer How to hardware in use?
Thank
 

Similar Topics

A
AKD BS7200 software
Hi there! I know this is playing in archeologist, but I need to tune a bit some older Kollmorgen/AKD Digifas 7100 servo drive. Any chance of...
Replies
3
Views
1,137
autobus
A
A
Plc siemens s7200
hey guys here first time for me in this awesome forum actually i have S7-200 connected to Winview HMI and HMI project file has lost and broken...
Replies
0
Views
600
Affrian
A
C
TD200 and S7200
If a TD200 program was created with the wizard in Microwin does anyone know if the code for the TD200 would be uploaded to micowin when doing a...
Replies
0
Views
1,176
cottagewood
C
B
S7200
Hi, I have a S7200 PLC with PC based WinCC Scada. This PC was replaced due HD failure and replace with a back-up PC provided by the contractor...
Replies
2
Views
1,625
Borgj
B
S
S7200 comms to Citect
Hi guys, I have a client with a siemens S7200 PLC (1215C CPU),which has an on board ethernet port (marked "profinet" on the PLC) and I need to...
Replies
1
Views
1,534
sigmadelta
S
Back
Top Bottom