I know someone that has the following Operator Interface Terminal:
Total Control Products with the following numbers:
QPI-ADB-201, QPI21100C2P Series A.
It's communicating to a SLC 5/03 over DH+.
Now from browsing the web, it appears that these are obsolete. But it looks like their being supported by GE. Is that correct? I also see references to Proface.
My problem is e doesn't have the programming software or the application files.
Does someone know what software is required to program this? And where could I get it? If the application files can't be found, can the application be uploaded from the panel?
Also where can I get the manual to this panel and the programming software? Thanks for the help.
Total Control Products with the following numbers:
QPI-ADB-201, QPI21100C2P Series A.
It's communicating to a SLC 5/03 over DH+.
Now from browsing the web, it appears that these are obsolete. But it looks like their being supported by GE. Is that correct? I also see references to Proface.
My problem is e doesn't have the programming software or the application files.
Does someone know what software is required to program this? And where could I get it? If the application files can't be found, can the application be uploaded from the panel?
Also where can I get the manual to this panel and the programming software? Thanks for the help.