jake75
Member
1746-BAS does it have to be on a specific slot number on a 10 slot rack or can go any slot?
Jake75
Jake75
1746-bas
- Thread starter jake75
- Start date
fuzzy logic
Member
As per the User Manual, it can be in any slot except slot 0.
Your module may be installed in any open slot of your SLC 500 I/O chassis except the first slot of the first chassis, which is reserved for the processor module.
- fuzzy logic
Your module may be installed in any open slot of your SLC 500 I/O chassis except the first slot of the first chassis, which is reserved for the processor module.
- fuzzy logic
Similar Topics
Hello,
We have an older SLC500 controlled system that is using a BASIC module to communicate to a third party device. Looking into converting the...
I am trying to program a 1747-M2 EEPROM in a 1746-BAS module. I can download the program and I enter "PROG" and it says successful. I can use the...
Hi,
I am upgrading a AB PLc to Siemens PLC logic and everything is ready for siemens but the problem is the existing PLC is communicating to DCS...
I'll admit that in all these years I have only encountered M0/M1 files one other time, and it was used to communicate with Eurodrives.
In a SLC...
We are using Sick CLX series bar code reader with AB 1746-BAS module in a outdated system . The processor is SLC 5/04.We want to revamp the system...
