i connected my thermocouple direct to an S7 300 AI card and configured it in the hardware configuration of my S7 400 CPU i am running PCS7 as the temperature is changing i am getting some signal on the channel driver but my problem is how do i scale the signal on the channel driver for me to get the correct temperature.
connecting type k thermocouple on s7 300 AI card
- Thread starter leomut
- Start date
Similar Topics
Good Day to all of you, this is my first post, i will try to explain as best as possible, english is not my natural language. I am performing an...
I have been working on this for a while now and I can't seem to get it. I was finally able to view the 1500 on the PanelView under the serial...
Hello, I was looking to store some values from our FactoryTalk Application using Datalog to a MariaDB. I see there is quite a bit of documentation...
I haven't encountered problems connecting to a PLC through VM Ware but I am with this particular machine. I'm running Windows 7 on a Windows 10...
Hi, I want to build a demo station to test devices and programs and I need some help with it. I want to connect GuardLogix, Piltzmulti and...
