sujinvipin
Member
i have a dc to dc converter of 48V input and 24 volt output giving 20 Amp maximum output current , now how can i calculate the current input or drawn by the converter?
dc to dc converter
- Thread starter sujinvipin
- Start date
andybutcher
Member
It is basically going to be half the output current plus the inefficiency of the converter.
Similar Topics
I am looking for a fiber-to-copper media converter that is 120 VAC powered with terminals for placement in a small panel, so I can't use the wall...
Problem:
Our PLC can only output 4-20mA, but the actuators it needs to control, modulate based on a 0-135Ohm signal. Buying 4 or 8 individual...
I would like to install a non HART device in a system that uses HART, do you have a converter
Communication between devices will stop working for a certain period of time. I caught the error message using WireShark. I cannot identify the...
Hi all,
I'm having a Red Lion DSPLE000 protocol converter on site to interface comms between an Allen Bradley L36ER CompactLogix, a S7-300 PLC...