Dialup Switch Security

BillRobinson

Member
BillRobinson
Join Date
Oct 2006
Location
Sydney, Nova Scotia
Posts
185
OK I have a dial-up Ethernet switch/modem for remote access. Now I can't have a username/password for the switch and the switch needs to be plugged into a phone line at all times. Since I can't use the username/password, is there anything else I can do for security?
 

Similar Topics

S
Sending Page to Dialup TAP Service from ControlLogix
I need to send alarm messages from a ControlLogix to a paging service that is accessed via a dialup modem service using the TAP protocol. We are...
Replies
1
Views
2,101
sanger
S
A
DL260 Comm Link through a dialup modem
A dial in ethernet switch modem (SLX-5MS-MDM-1) connects PLC DL260, HMI EA7, and a computer through ethernet. ip address would be 192.168.0.10...
Replies
0
Views
2,235
AlecTek
A
S
Remote dialup with PLC's. Mitsubishi Password retrieval. Serial number location.
If anyone would like to find out how to set up a cheaper modem to communicate with plc's give me a shout. If you need to find serial numbers for...
Replies
5
Views
5,662
rcmichelle
R
R
OPC connection via dialup modem link
Did anybody try to set OPC connection via dialup phone line? If it is possible, what troubles can occurs with DCOM configuration? Thanx a lot.
Replies
1
Views
2,759
dchartier
D
T
AB 1761-NET-ENI won't send email with dialup
Hi all, I have an ethernet network setup with a Mlogix 1500 controller and a 1761-net-eni module.I can download and upload programs to the...
Replies
6
Views
6,371
tonycic
T
Back
Top Bottom