Ac31graf
- Thread starter The Hien
- Start date
In your programming Software please open the sheet Ressouces (on the left side) - Global Variables - System constants.
With the value of the constant "KW00_00 AT %MW3000.0" you can modify the requested mode of the plc.
-1 = Master
-2 = Standalone
0..61 = Slaveaddress in slavemode
With the value of the constant "KW00_00 AT %MW3000.0" you can modify the requested mode of the plc.
-1 = Master
-2 = Standalone
0..61 = Slaveaddress in slavemode
Similar Topics
I have to upload an application from an abb 07kr51 to a pc using ac31graf, does anyone know if the plc function is interrupted during this action...
Dear Experts,
One of my client want me to take backup of ABB 07CR41 PLC.
I never worked on ABB, but having command on Siemens, Allenbradly...
Can anybody help me out in performing log x, x raised to y, and other math calculations using AC31GRAF software for ABB AC31 series PLC.
Good morning,
my name's Byro Aad and I'm working in Spain with Plc's. Actually I'm working with ABB plc's, with the 07KT94, and its programming...