We have installed a control net network on which we have 3 nos Flex Logix controllers and 2 nos Workstations (PC).
The problem is that on one PC (Node Address-15) some parameters (Tags) (including both analog and digital) are not getting displayed in RSView32. I am unable to find the same tags in RSLinx. However on restarting the PC some parameters from them are getting displayed but still some parameters are not getting displayed.
We have checked all possible points like Topic reconfiguration (RSLinx), Node reconfiguration and tag update rate (RSView32), replacement of PCIC Card, even we replaced the PC etc. but the problem remains same.
Please provide us appropriate suggestion & solution.
The system detail is given below.
There are total 5 nodes on control net network the detail of every node is given below.
a) Node:1 FlexLogix 1788-CNC (Node Address-1)
The following IO modules are configured on this node.
IE-8 : 4 nos, OE-4 : 4 nos, IF-8: 1 nos, IRT-8 : 4 nos, IB-16 : 1 nos, OW-8 : 2 nos
b) Node:2 FlexLogix 1788-CNC (Node Address-6)
The following IO modules are configured on this node.
IE-8: 4 no’s, OE-4: 3 nos, IRT-8: 5 nos, IB-10 + OB-16: 1 nos
c) Node:3 FlexLogix 1788-CNC (Node Address-5)
The following IO modules are configured on this node.
IE-8: 2 no’s, OE-4: 3 nos, IRT-8: 1 nos, IB-16: 1 nos, OW-8: 1 nos
d) Node : 4 (Node Address-11)
PC (1784-PCIC), RSView 32
e) Node : 5 (Node Address-15)
PC (1784-PCIC), RSView 32
The problem is that on one PC (Node Address-15) some parameters (Tags) (including both analog and digital) are not getting displayed in RSView32. I am unable to find the same tags in RSLinx. However on restarting the PC some parameters from them are getting displayed but still some parameters are not getting displayed.
We have checked all possible points like Topic reconfiguration (RSLinx), Node reconfiguration and tag update rate (RSView32), replacement of PCIC Card, even we replaced the PC etc. but the problem remains same.
Please provide us appropriate suggestion & solution.
The system detail is given below.
There are total 5 nodes on control net network the detail of every node is given below.
a) Node:1 FlexLogix 1788-CNC (Node Address-1)
The following IO modules are configured on this node.
IE-8 : 4 nos, OE-4 : 4 nos, IF-8: 1 nos, IRT-8 : 4 nos, IB-16 : 1 nos, OW-8 : 2 nos
b) Node:2 FlexLogix 1788-CNC (Node Address-6)
The following IO modules are configured on this node.
IE-8: 4 no’s, OE-4: 3 nos, IRT-8: 5 nos, IB-10 + OB-16: 1 nos
c) Node:3 FlexLogix 1788-CNC (Node Address-5)
The following IO modules are configured on this node.
IE-8: 2 no’s, OE-4: 3 nos, IRT-8: 1 nos, IB-16: 1 nos, OW-8: 1 nos
d) Node : 4 (Node Address-11)
PC (1784-PCIC), RSView 32
e) Node : 5 (Node Address-15)
PC (1784-PCIC), RSView 32