Cp 340

prabhuinst

Member
P
Join Date
Apr 2011
Location
Tamilnadu
Posts
20
I am using cp 340 6ES7-340-1BH00-OAEO printer module, That module output terminal is 9 pin connector (RS 232 communication ) ,Any one please help me How to check the Module output came or not?
Please give the details and settings, Then Now i want to connect the Zebra printer, Please help me
 

Similar Topics

D
Help with TCSEGDB23F24FA M340 Modbus Plus Proxy Module
Hi Everyone, i was hoping for a little help with this module. i have data that needs to be read from a different plc through the Modbus plus...
Replies
8
Views
75
davexr
D
S
NTP for Schneider M580/M340
Hello all, I am wanting to update the system clock via NTP in the M580/M340. I'm aware that we are able to connect to a NTP in the controller...
Replies
4
Views
115
S.Woollett
S
E
Modbus serial data from multiple devices to M340 controller
I have 9 field devices, three METSEPM5110 power meters and six ACE949-2 rs285 interface modules. I want to read this Modbus rtu data through rs485...
Replies
8
Views
315
Enggshab
E
R
M340 as modbus master
I'm using M340 (Schneider Electric) as modbus master. It works fine but if there is a disconnection with the slave, it stops working even after...
Replies
2
Views
421
Corsair
C
T
M340 and SR2MOD03
Hello, I am trying to send sms messages using SR2MOD03 with an M340 and can't find anything related to it on the internet, can you please help...
Replies
0
Views
204
the18
T
Back
Top Bottom