lrferigno
Member
On the Data Source for the tags, I'm trying to type the address at bit level B3:0/1 but Crimson is on decimal, B003:0000Could I have some suggestions on how to type the tags from bit level into this crimson tag format? Thanks
RedLion Crimson 3.0
- Thread starter lrferigno
- Start date
On the Data Source for the tags, I'm trying to type the address at bit level B3:0/1 but Crimson is on decimal, B003:0000Could I have some suggestions on how to type the tags from bit level into this crimson tag format? Thanks
DamianInRochester
Lifetime Supporting Member
What version of Crimson 3 are you using?
Listed under the bug fixes for Build 437 (8/15/2011) is
"Fixed flag tags not showing PLC address in bit selection"
Listed under the bug fixes for Build 437 (8/15/2011) is
"Fixed flag tags not showing PLC address in bit selection"
TimWilborne
Lifetime Supporting Member
Also make sure you selected a flag tag and not a basic tag.
Similar Topics
Hey guys, hoping someone here could give me a little advice. I'm working with a CR1000-04000 in Crimson 3.1 and I was interested in adding the...
Hi,
I have a complex database in Crimson 3.0 and in one of the display pages I am trying to get a tag to show the sum of several other tags. The...
It states WinPcap must be installed for the Emulator to function.
WinPcap.org states that the technology is mature with no updates planned.
Am I...
Following on from another thread, I just downloaded Crimson 3.2 and it now supports CR and Graphite HMIs.
Time for a 'play' :-)
It seems to have...
Action On Release command Set(ConveyorPopup,ConveyorPop_1) rejected w/ string tags.
SetStringTag(index, data) wants an index.
How does one pass...