error on uploading need gds files for festo module

harrydeharry

Member
H
Join Date
May 2008
Location
Delhi
Posts
237
Dear All,
I am getting the following error while uploading from a S7 315 CPU, it has some Festo CPs on the profibus like CP-E16-M8 etc, think I need their gsd to get them uploaded or something else.
Please help
Thanks in advance...........
Harry

festo.jpg
 

Similar Topics

A
Modicon M258 uploading program error
Hey, i'm getting an error when i try to upload a program from a modicon M258 TM258LF42DT using eithernet. i tried using both SoMachine V4.1 and...
Replies
12
Views
1,397
Lare
L
M
FPWin GR - File Uploading Error
Hello, I'm new to this forum and PLC programming in general so in the responses, please explain things like you would a 5 year old. Thanks in...
Replies
1
Views
2,961
sigmadelta
S
S
(2000) and (120) error while uploading to pg
Hi Experts, I am having problem in my machine in which CPU-3162 dp is installed and in profibus approx 26 nodes are attached.(some are ET200 and...
Replies
1
Views
2,113
gclshortt
gclshortt
W
Studio 5000 Uploading error
Hiya, Im currently at a customer in Mexico. One of the problems my customer has is uploading the PLC program from the PLC. I know this is not the...
Replies
7
Views
8,333
wesselvos
W
S
uploading from old PLC causes RS5000 fatal error,
Hi Chaps, I'm using a Logix 5555 processor as a test bed. 1756-L55/A: series A rev 1.4 I took it out of an old machine. My problem is whenever...
Replies
3
Views
3,652
JaxGTO
JaxGTO
Back
Top Bottom