Gateway for S7300-PN to CompactLogix L35E ??
- Thread starter mosama
- Start date
Check out the AnyBus adapters / gateways:
http://www.hms.se/
I have used them in a Ethernet/IP slave to PN device and it worked fine.
http://www.hms.se/
I have used them in a Ethernet/IP slave to PN device and it worked fine.
Hi Mosama,
Here is a link to a EtherNet/IP adapter to Profinet slave gateway:
http://www.anybus.com/support/support.asp?PID=301&ProdType=Anybus X-gateway
I believe that the company Xceltra Ltd is representing HMS in Egypt..
//Patrick Lansdorf
Here is a link to a EtherNet/IP adapter to Profinet slave gateway:
http://www.anybus.com/support/support.asp?PID=301&ProdType=Anybus X-gateway
I believe that the company Xceltra Ltd is representing HMS in Egypt..
//Patrick Lansdorf
Similar Topics
Hi All,
Has any of you tried to change the IP Gateway of the PLC (of course, essentially of the ENBT card), while in a redundant configuration...
We are trying to poll data coming from a PLC for remote monitoring we have the IP address of the PLC and the default port number and the path is...
Hello. I am trying to use a Prosoft AN-X4 to improve the communications for a new panelview plus 7. This is going from a SLC-500 through DH+ to a...
I have been looking to this and thought I'd ask for input from others before I take it in a wrong direction.
The guy who used to set these up...
Hi,
I recently installed 2 1783-NATR devices into two of our machines. The machines are pretty much identical, both having 1769- L24ER-QFC1B...