h8ps cam positioner and Simatic S7-300

sylwek

Member
Join Date
Feb 2004
Location
Poland
Posts
26
Hello,

I have Omron Cam Positioner H8PS-16BP
, and I want connect this device to PLC Simatic S7-300.

Does the cam Positioner H8PS-16BP is compatible with plc s7-300?

In Simatic PLC there are standard 24V DI and 24V DO.
Can I connect Omron cam otputs (PNP open collector) to digital inputs in Simatic S7-300 SM321(24V) module?
Can I connect 24V digital outputs (in S7-300 SM322 module)to Digital inputs in Omron H8PS module ???
 

Similar Topics

Hello all, I'm looking for ideas or solutions on having a industrial webcam or IP camera that we could use on our equipment to help monitor and...
Replies
4
Views
1,183
Kindly, I was trying to use the Motion Arm Output Cam (MAOC) instruction on a Rockwell plc, but I need to have it in a general AOI function. So, I...
Replies
1
Views
1,008
If a polynomial is used in a cam-profile for motion control, you normally have the option to displace the inflection point from the standard 0.5...
Replies
1
Views
1,415
I have submitted this tread to a magazine and it got rejected by the editor that obviously has never done motion or used cam tables.
Replies
6
Views
2,088
Hello to everyone. There is an inductive sensor to control the angle on the "Balluff bsw 819" rotary cam switch in a 1000 ton mechanical press...
Replies
0
Views
1,113
Back
Top Bottom