marzukiddin
Member
Hi,
I Have problem error when start with Display Unimaticontrol - e , for machine test Hose Pressure UNIFLEX P200.
The Display will write self with "VVVVVVVVVVVVVVVVVVVVV" , like example in photo attaced.
I ever Remove all connector to PLC ( During Power Off ) mean need to reset for error and Clean all Connector with CRC, after re connect Display ok ( Good Function ) but that only hold 2 Days.
After 2 days Problem return appear.
:wishlease advice to handle this problem from your all
Thanks,
Rgds,
Marzukiddin
I Have problem error when start with Display Unimaticontrol - e , for machine test Hose Pressure UNIFLEX P200.
The Display will write self with "VVVVVVVVVVVVVVVVVVVVV" , like example in photo attaced.
I ever Remove all connector to PLC ( During Power Off ) mean need to reset for error and Clean all Connector with CRC, after re connect Display ok ( Good Function ) but that only hold 2 Days.
After 2 days Problem return appear.
:wishlease advice to handle this problem from your all
Thanks,
Rgds,
Marzukiddin