Autofabian
Member
any advise how to integrate a Px4i Printer with a SLC 5/04. The current Rs232 port in the PLC is use to communicate to a Pro-fase HMI.....anybody have done that???.....
SLC 5/04 and a PX4i Printer from Itermec
- Thread starter Autofabian
- Start date
Similar Topics
Howdy everyone,
My company has a few machines running on SLC500 based PLC, and everytime it makes a part we count up on the counter which gets...
Hello All!
I am writing today because I cannot figure this out for the life of me. Another site I am affiliated with keeps having their slc 5/03s...
I’m attempting to send a temperature from a SLC-5/02 to an EZiMarquee display. The vendor said to use a MSG instruction to send the data to the...
Hello all. I have a few SLCs in my plant and of late we've seen a weird issue: The system will be running normally and then randomly the outputs...
I am working on setting up a Prosoft Datalogger model PLX51-DLplus-232. This unit will be collecting data from a SLC 5/05 on the DB9 port set to...
