1756-CNB ControlNet Module

Tim

Member
T
Join Date
May 2002
Location
Indiana
Posts
291
I'm connecting to a 1756-CNB with my laptop through a 1784-PCC serial card. My question is how long can the RJ45 cable be? The one I have is around 4 to 6 ft and I want to make a really long one, but I couldn't find any "max" distance for communication with my laptop.
Thanks
Tim
 

Similar Topics

ckchew666
Redundant controlnet using 2x 1756-CNB not 1756-CNBR?
Hi, Currently I'm working on a project with redundant media (CNET) architecture for CLX. Attached is the architecture proposed by the Rockwell...
Replies
7
Views
3,531
Oakley
O
preacher.ca
1756-CNB: Service Request Error: Invalid mode/state for service request
Good day and Merry Christmas Eve. The title's error has been dogging me for roughly a month and today I finally figured out what the issue was...
Replies
0
Views
2,287
preacher.ca
preacher.ca
A
Change 1756-CNB with 1756 CN2
Dear all I have an ALLEN BRADLEY PLC system with a local and a remote rack. On the local rack I have 1756-CN2 and on the remote rack I have...
Replies
2
Views
1,889
AFPC
A
P
Controllogix 1756-CNB/E MSG To 1746-SCNR
Hello all, I'm am trying to figure out how a message initiated from a controllogix processor writes to a SLC 5/04 using control net. Reading the...
Replies
2
Views
1,858
p_logix
P
S
1756-CNB vs 1756-CN2
What's the difference between the two? What's the proper one to use for communicating to a remote i/o rack via controlnet (this is for a Control...
Replies
1
Views
2,631
rdrast
rdrast
Back
Top Bottom