S7 CP343-1 IT FTP Password

barryoc

Lifetime Supporting Member
B
Join Date
Nov 2009
Location
Kilkenny
Posts
148
Hi,

I've just bought a second hand ethernet card for s7-300 (6gk7 343-1 gx00) to experiment with. At the moment i'm trying to ftp a webpage to the cp module but it asks for a username and password. I have updated the firmware, so can anyone tell me what the default username and password is.

Regards,
Barry

:sick: Sorry guys, completely over looked the user tab in hardware configuration.

Problem solved.
 
Last edited:

Similar Topics

B
CP343 As FTP-client
Hello, I'm trying to make a FTP-connection with a CP343 Advanced module as a FTP client. I'm using a PC as FTP-server. The PLC is equipped with...
Replies
1
Views
2,182
Badgeke
B
B
Siemens CP343 Profinet help
Hi, I have a customer with a S7300 from around 2013 which they link to approx 25 inverters, 3 DP to DP converters and 5 IM153 remote I/O units...
Replies
8
Views
330
JERA
JERA
B
CP343-2 not detecting ASi nodes
I've been called to a site to assist with an ASi fault. The line has been down for a couple of weeks following a failure of the ASi power supply...
Replies
6
Views
1,330
beethoven_ii
B
D
S7-300 with CP343-1 Comms Issue
I have an S7-300 and an HMI. The HMI is the only device that talks over Profinet through the CP343-1 module. It's run fine for a couple of years...
Replies
2
Views
517
DJones183
D
A
CPU313C+CP343-1 Communication lag while both OPC and HMI are accessing
Dear experts, I have the following setup: CPU-313C (6ES7313-5BF03-0AB0 V2.6) + CP343-1 (6GK7343-1EX30-0XE0 V2.0) communicating with Siemens PC...
Replies
7
Views
2,732
JesperMP
JesperMP
Back
Top Bottom