Hojland Member H Join Date Oct 2006 Location Langå Posts 203 Nov 30, 2011 #1 Hi I have 2 micrologix 1100 and I want the one to control an output on the other. I know it's an MSG I need, but how do i do. There are Ethernet in between them. I need a full discription on the msg function
Hi I have 2 micrologix 1100 and I want the one to control an output on the other. I know it's an MSG I need, but how do i do. There are Ethernet in between them. I need a full discription on the msg function
bce123 Lifetime Supporting Member B Join Date Feb 2011 Location texas Posts 1,177 Nov 30, 2011 #2 hojland, look at the two programs in this post the two plcs are set up to talk to each other. http://www.plctalk.net/qanda/showthread.php?t=66736&page=3 then if you have questions post back. Best regards, Steve
hojland, look at the two programs in this post the two plcs are set up to talk to each other. http://www.plctalk.net/qanda/showthread.php?t=66736&page=3 then if you have questions post back. Best regards, Steve