Load two db

Berra

Member

B

Join Date

Mar 2007

Location

Sweden

Posts

137

• Dec 5, 2011

• #1

Hi guys

Why can't i load a db value to another db when i use the pointer ???
I have try to open both db , but that solution is not working either.


Regards

Berra

 

L D[AR2P#0.0]

Lifetime Supporting Member

L

Join Date

Nov 2006

Location

UK

Posts

6,702

• Dec 5, 2011

• #2

Are you saying that after this code executes DB1.DID1440 does not contain 3.0 ?

 

Berra

Member

OP

B

Join Date

Mar 2007

Location

Sweden

Posts

137

• Dec 5, 2011

• #3

Yes, i get a Hexavalue on this adress, in other adress i get nothing in Db1.DIDxxx

 

L D[AR2P#0.0]

Lifetime Supporting Member

L

Join Date

Nov 2006

Location

UK

Posts

6,702

• Dec 5, 2011

• #4

Post a cut down version of your project (in a library) with the code necessary to reproduce the problem.

 

Berra

Member

OP

B

Join Date

Mar 2007

Location

Sweden

Posts

137

• Dec 5, 2011

• #5

i don't rember how i do that

 

L D[AR2P#0.0]

Lifetime Supporting Member

L

Join Date

Nov 2006

Location

UK

Posts

6,702

• Dec 5, 2011

• #6

Retrieve the attached empty project, copy your blocks into it, archive it then post as an attachment.

 

Berra

Member

OP

B

Join Date

Mar 2007

Location

Sweden

Posts

137

• Dec 6, 2011

• #7

L D[AR2 said:

Retrieve the attached empty project, copy your blocks into it, archive it then post as an attachment.

Click to expand...

Thank you L D [AR",P#0.0] now i have copied in to the library.

 

Berra

Member

OP

B

Join Date

Mar 2007

Location

Sweden

Posts

137

• Dec 6, 2011

• #8

Sorry i have missed that i transfer to i dib, It should be a did.

Tank you for you time L D [AR2,P#0.0]

Regards

Berra