s7-300's communicating over ethernet

benfleck

Member
B
Join Date
Jul 2009
Location
Houston
Posts
2
I have two 315-2pn/dp's connected via Ethernet radio. I want to be able to see Input bits remotely from either PLC. I read that it is possible to do this through the Hardware manager without writing any code. I'm using plcsim to test this. below is how I set the PLC's up in hardware manager.

PLC 1 ip
192.168.99.1
inputs I0.0-I5.0

PLC 2 ip
192.168.99.2
inputs I6.0-I9.0

Is this at all possible?
 

Similar Topics

M
Communicating with S7-300 thru my PC....plzzz help
hi everyone, my problem is that whenever i try to view accessible nodes or try to download the object files into my plc, it generates differnt...
Replies
13
Views
2,517
garby
G
M
Communicating with S7-300 thru my PC....plzzz help
hi everyone, my problem is that whenever i try to view accessible nodes or try to download the object files into my plc, it generates differnt...
Replies
0
Views
1,379
minerva
M
D
Need help communicating pc to panel view 300 standard
I have RS232 9 pins (pin to pin connection) connecting my laptop to panel view 300 with serial number : 2711-K3A5L1. I am using panelbuilder 32...
Replies
10
Views
8,329
WildeKurt
W
M
communicating with panel view 300
I am trying to upload from pv300 model 2711-k3a5l1 b that's a dh-485 dos someone know what type of driver i have to use and wat cable i should use
Replies
10
Views
12,324
Mickey
Mickey
M
Communicating Siemens S7300, S7400
I would like to communicate with Simens S7300, S7400 using Visual Basic. I want to know any other possiblity except OPC to communicate the same.
Replies
2
Views
4,360
RRobbins
RRobbins
Back
Top Bottom