CTI 2500 C200 Profibus config

Hilgard

Member
H
Join Date
Jan 2008
Location
Rustenburg
Posts
16
Hi All,
Long time since my last visit.

I have a problem with my TI/Siemens505/CTI PLC. I need to configure new IO in the existing Profibus IO. Unfortuantly I dont have the existing config in a binary file so I cant merge it with CTI. I use Workshop 505 Ver 4.32. I does have the capibilty to do the Profibus config in it but then I must redo all the existing config. I tried and it doesnt want to go online with the Remote bases. I also tried comm Profibus 5.1 but it seems like it doesnt have all trhegsd files.

Any advice will be appreciated.

Thank you,
Hilgard
 

Similar Topics

H
CTI 2500-c200 Firmware/ FE 103
Hi There, I have a problem with my CTI 2500-C200 CPU; It is anew release with Firmware 6.02 and CPLD 6.02. My CPU is getting a Fatal Error with...
Replies
1
Views
2,879
Hilgard
H
W
CTI 2500 C200 OPC Server.
Hi I am trying to find a suitable OPC server for the above plc. I will be using the ethernet port on the processor and not via the sperate 2572...
Replies
2
Views
2,762
Bardes
B
G
CTI-2500 I/O not recognize TI-555
Hello Guys, I´m try to upgrade from an old TI-555 plc to CTI-2500: 1. Program has been downlaoded to CTI-2500 without any errors. 2. I/O config...
Replies
12
Views
2,529
Henny
H
E
CTI 2500 - PID loop programming
I'm having trouble programming a PID loop in 505 workshop. Are there any examples out there of how to program this, or how it even works? I got a...
Replies
0
Views
1,483
electro89
E
W
Siemens TP277 ethernet to CTI 2500
Can a Siemens TP277 communicate with a CTI2500 CPU via the ethernet port? There are only DP and serial selections for the Simatic 505 in the WinCC...
Replies
4
Views
2,123
winklerlars
W
Back
Top Bottom