Difference between 2711-CBL-HM05 and 1761-CBL-HM02

jC.

Member
J
Join Date
Jul 2010
Location
Australia
Posts
26
So as the title says... what is the Difference between the 2711-CBL-HM05 and 1761-CBL-HM02?. Other than the length of course.

Thanks in advance.

EDIT: The reason I'm asking is because I'm after a 3M or longer 1761-CBL-HM02
 

Similar Topics

M
PanelView C600 Difference between 2711-T6C and 2711-T6T
So I just noticed I have a panelview 2711-T6C, not a 2711-T6T, however I wrote a program in DesignStation for the 2711-T6T... is this going to be...
Replies
0
Views
2,143
mike64b
M
H
iFix 5.1 - Difference in value between AO and AA block
Hello, I have a problem with AO- and AA-Tags. When I use for example the tag AO_Test with the address 200 and type the value 1,2 in, the AA-Tag...
Replies
7
Views
1,401
Heinz8
H
Mas01
GX developer: what's the difference between a coil and a SET/RST?
As per the title. This might seem like a basic question to many, but I'm unclear about the difference between a coil ( ) and an application...
2
Replies
28
Views
4,001
parky
P
C
What is the difference between a Regular Freq. Drive and a Pump Drive ?
Good Morning , I have 2 Frequency Drive panels to build and commission . It is for 2 pump systems . Just wondering , what is the...
Replies
4
Views
1,958
Cydog
C
E
Difference between SIMATIC Batch and PM Control
Hi Experts, Good day! What are the differences between PCS7 SIMATIC Batch and PM Control? Do you have any manual like "Getting Started "...
Replies
0
Views
800
EMENDOZA
E
Back
Top Bottom