Stevie_THFC
Member
Hey guys im getting some faults with our simodrive 611 and cant seem to find the fault codes anywhere was wondering if anybody could help.
The C axis is faulting out on rotation same spot everytime same turning direction. The fault codes we are getting are
1. 25102 C axis drive fault
2. 300608 Axis C1 drive 3 speed control
3. 21612 Channel 1 axis C/C1 VDI signal
4. 510112 Saw simodrive UE not operative
Any help would be greatly appreciated
Cheers
Stevie
The C axis is faulting out on rotation same spot everytime same turning direction. The fault codes we are getting are
1. 25102 C axis drive fault
2. 300608 Axis C1 drive 3 speed control
3. 21612 Channel 1 axis C/C1 VDI signal
4. 510112 Saw simodrive UE not operative
Any help would be greatly appreciated
Cheers
Stevie
