RSLogix5000 with 3rd party servo motor

I uploaded program from Control Logix with RSLogix5000 V17. This PLC control servo motor from Parker with Ultra3000 with sercos network to PLC. I need to make servo tunning to adjust position and velocity loop but the program informed motion database does not contain data for Motor Catalog Number. I knew this problem due to servo monor not from Rockwell.

I can find Parker motor specification but how can I update motor database to RSLogix5000 then I can make servo tunning.

in Logix V19, you can select to enter custom motor nameplate data. In conjunction, you'll also have to run the commutation test - not that I've done that before

ttichy, could you tell me where to put custom motor data in RSLogix5000 V19

I though that the custom motor data was on the ethernet servos eg kinetics 6500

you are using sercos to a ultra 3000 -V17 you need a custom motor database
installed on your PC
the System integrator should have given you a copy of the custom motor database


This may have more information
http://rockwellautomation.custhelp.com/app/answers/detail/a_id/262237

Yes, sorry. that's only on the Kinetix 6500.