AB 1794-IE12 analog input card

Kingy

Member
K
Join Date
Feb 2012
Location
England
Posts
1
Hello All,

Have any of you experience of using Allen Bradley Flex 1794-IE12 analogue input cards? In particular with signal cables greater than 10m (33ft), which the manuals warn against. I'm interested to know what the actual problems are e.g. noise, voltage drop etc., as I have an application with several very long cable runs, > 50m.

Interested to hear your experiences.

Thanks
 

Similar Topics

J
Wiring Flex IO 1794 ie12 analog input module with BT 1794 TB3G
Could someone show me an example on how to wire the analogic input for lets say channel 0 ?? Ive found this manual...
Replies
2
Views
5,227
widelto
widelto
W
Question about wiring FLEX I/O 1794-IE12
Hi all, what is the proper way to fuse 1794-IE12 modules? fuse sizes/locations? We are burning up these modules in our facility.
Replies
6
Views
1,707
5618
5618
Y
1794-IE12 IO module fault
We are getting IO module fault on device status of 1794-IE12 module. Please suggest if any solutions.
Replies
0
Views
649
yhvadar
Y
P
1794-ie12 scale below 4mA at 4...20mA setting
Good afternoon. 1794-ie12 module available, channel set to 4...20 mA. According to the table from the manual, we get from 0 at 4mA to 30840 at...
Replies
5
Views
2,240
Robb B
R
S
1794-IE12 Wire Break Behaviour
Hi, I have a 1794-IE12 FlexIO module connected via Ethernet/IP to a 1769-L24ER CompactLogix controller. The inputs are configured for 0-20mA and...
Replies
3
Views
2,342
simonv
S
Back
Top Bottom