How to dial Modem using ABB PLC AC800C
- Thread starter The Hien
- Start date
elevmike
Member
I'm not famillare with your plc type. However I have not run across a PLC that can initate AT commands, causing your modem to autodail out.
You may need a modem that will initate a dial via a seperate input.
Check this link for a modem that will dial out:
http://web3.automationdirect.com/adc/Shopping/Catalog/Communication_Products/Modems/MDM-TEL
You may need a modem that will initate a dial via a seperate input.
Check this link for a modem that will dial out:
http://web3.automationdirect.com/adc/Shopping/Catalog/Communication_Products/Modems/MDM-TEL
Similar Topics
We have a customer that is having control system problems. They use a PLC that has been set-up for phone/fax remote access.
I have a US Robotics...
I urgently need to be able connect a G306 to the Internet via a Dial-up modem, so that I can use it to send an email.
As on Friday, we have...
hello
i have 1769-L35E compact Logix as master connected to 7 MicroLogix 1400 throw DFI via 9300-radkit Dialup Modem .
how i can exchange...
Has anyone experiencing problems with this device? To me it looks like its a plain piece of sh*t and I'm looking for a replacement from another...
i have a TIM3V-IE on one end with CPU and TIM 4V on another end with WINCC.
CPU 315-2DP TIM 3V-IE----dial up modem-----TIM 4V----WINCC......
i...