1769-ASCII simultaneous (dual channel) on RSlogix500

miqueias86

Member
M
Join Date
Jan 2012
Location
brasil
Posts
1
I need help to develop an application that can send and receive ASCII data in both channels 0 and 1 simultaneously.

The sample is attached to the channel 0 only.

Could someone help?
 

Similar Topics

JoeTauser
1769-ASCII module receives delimiter only
This is maddening. I'm developing a new application where a 1769-L32E with a 1769-ASCII module is communicating with a Tegam micro-ohmmeter...
Replies
2
Views
1,582
drbitboy
drbitboy
J
1769-ASCii data receive "backwards"
so, Micrologix 1500. 1769-ASCii module. Bringing data in over the Channel 0 serial port. Setup is attached below. As is a snippet of the code...
Replies
4
Views
1,629
JZerb
J
F
Weirdness with 1769-ASCII port opening/closing
I tried searching but either there aren't any answers out there for my Google-fu isn't up to snuff. My customer has a laptop with Labview set up...
Replies
0
Views
1,555
FactoryTalktotheHand
F
F
Troubles with 1769-ASCII and Labview
Working with a customer who wants to do some ASCII handshaking between the PLC (a 1769-L24ER) and Labview on a laptop. I can send data from the...
Replies
4
Views
1,836
Highland Controls
H
Scottryan03
1769-Ascii Module Help-Pinout??
Hello Everyone, I am looking for some help on this dreaded 1769-Ascii module. I have been doing a lot of digging on this module in the forum...
Replies
2
Views
2,440
Mickey
Mickey
Back
Top Bottom