Hello,
My problem is i need to change a siemens S5 rig to a S7 1214c
The only problem i have is 2 things:
1) On the S5-95u there is a 8x analog input. How can i fix this? Cut the cable and use a analog module on the 1214c, thats the 8xRTDx16 bit (SM 1231RTD)?
2)This rig uses a high speed counter module for a position encoder. That uses a 15 pin connector. What do i need for the 1214c to get this signal?
A picture of the modules:
http://img692.imageshack.us/img692/5722/dsc03830vb.jpg
Hope you can help me
Thank you
My problem is i need to change a siemens S5 rig to a S7 1214c
The only problem i have is 2 things:
1) On the S5-95u there is a 8x analog input. How can i fix this? Cut the cable and use a analog module on the 1214c, thats the 8xRTDx16 bit (SM 1231RTD)?
2)This rig uses a high speed counter module for a position encoder. That uses a 15 pin connector. What do i need for the 1214c to get this signal?
A picture of the modules:
http://img692.imageshack.us/img692/5722/dsc03830vb.jpg
Hope you can help me
Thank you