Weintek EasyView 500

isteak007

Member

I

Join Date

May 2009

Location

NewYork

Posts

216

• Feb 25, 2012

• #1

How can i upload project from EasyView 500 for editing purpose.
i can upload the eob file by Easy Manager but it is not possible to edit.

http://www.tecon.cz/pdf/EB500UGu.pdf

In manual it says
See page 6
Upload *eob file can't be edited. So how can i edit uploaded file by Easyview

 

aslan

Member

Join Date

Dec 2002

Location

İstanbul

Posts

57

• Feb 27, 2012

• #2

Open eob file;

Tool > Decompile

 

isteak007

Member

OP

I

Join Date

May 2009

Location

NewYork

Posts

216

• Feb 27, 2012

• #3

Thanks Man, I will check it

 

isteak007

Member

OP

I

Join Date

May 2009

Location

NewYork

Posts

216

• Feb 27, 2012

• #4

aslan said:

Open eob file;

Tool > Decompile

Click to expand...

There is no Decompile option in Easy Builder 500. Easybulider 8000 has a decompiler option but it only supports XOB file not EOB

 

aslan

Member

Join Date

Dec 2002

Location

İstanbul

Posts

57

• Feb 28, 2012

• #5

It should be has.

 

isteak007

Member

OP

I

Join Date

May 2009

Location

NewYork

Posts

216

• Feb 28, 2012

• #6

Ok your HMI is Maple System HMI Software
But Mine is Weintek HMI Software

But It seems everything is same.
Do you Know How to download this software?

 

aslan

Member

Join Date

Dec 2002

Location

İstanbul

Posts

57

• Feb 28, 2012

• #7

eb500-v.2.74



ftp://www.ozdisan.com/SAVIOR_OTOMASYON/OPERATOR PANELI/EASYVIEW/YAZILIMLAR/

 

isteak007

Member

OP

I

Join Date

May 2009

Location

NewYork

Posts

216

• Feb 28, 2012

• #8

aslan said:

eb500-v.2.74



ftp://www.ozdisan.com/SAVIOR_OTOMASYON/OPERATOR PANELI/EASYVIEW/YAZILIMLAR/

Click to expand...

Thanks Man it's Working.
It seems they use both same software but just little bit different.

Greetings
ISteak