I am using TWDLCDA24DRF along with two TM2AMI4LT.I had PT 100 (3 wire) as inputs.
I want to read the temperature in Celsius.
I had configured in twido suite as under
Input type as PT100
Scope as Celsius
Minimum as -2000
Maximum as 6000
But I don’t read correct reading in %IW1.0.Its much higher that it should be.
I want to read the temperature in Celsius.
I had configured in twido suite as under
Input type as PT100
Scope as Celsius
Minimum as -2000
Maximum as 6000
But I don’t read correct reading in %IW1.0.Its much higher that it should be.
