Micr0 1400 S6:44h error user define

Hello

Do someone have experienced this error on a micrologix?

The help doc just say ''user define error'' as a description.

This bring a major fault to 2 identical plc panel at the same time.

Any help would be appreciated as i don't find anything on Google about it either

See picture below

ok very appreciated

can you told me where you found it ?

Jeff23spl said:

can you told me where you found it ?

Click to expand...

Sure..

Appendix C first link.

http://literature.rockwellautomation.com/idc/groups/literature/documents/rm/1766-rm001_-en-p.pdf

http://literature.rockwellautomatio...ml1400&passedType=Full&passedParameter=ml1400