CliveBaker
Member
Hi All,
I am trying to commission a S7 CPU 315-2 system with 3 CP 342-5 Profibus cards and 2 DP/PA-Link(IM153-2),DPV1.
When I plug in my PC adaptor set to profibus it cannot see anything. The Profibus DP text is red on all the CP 342-5's
On the DP port on the CPU I can see the devices but they have a RED X across them. when I open them it says not connected in the status bar.
I have tried this on 2 laptops one of which I have used PDM on before and get the same results.
Any help would be appricated.
Clive.
I am trying to commission a S7 CPU 315-2 system with 3 CP 342-5 Profibus cards and 2 DP/PA-Link(IM153-2),DPV1.
When I plug in my PC adaptor set to profibus it cannot see anything. The Profibus DP text is red on all the CP 342-5's
On the DP port on the CPU I can see the devices but they have a RED X across them. when I open them it says not connected in the status bar.
I have tried this on 2 laptops one of which I have used PDM on before and get the same results.
Any help would be appricated.
Clive.