pusaran
Member
Is there anyway that i can record the value of a counter to excel or textfile?
CoDeSys log I/O value to Excel/textfile
- Thread starter pusaran
- Start date
(8{)} ( .)
Lifetime Supporting Member
You can use the file I/O library to write CSV files. Pretty straight forward.
If you're using a PLC like a WAGO 750-88x you've got about a meg to Play with. The 750-880 has an SD RAM slot so you can store up to 8G. Be warned, however, that if you're planning to do a lot of this, SD RAM has a limited number of writes, about 1M if I remember correctly.
If you're using the soft PLC the number of writes is not an issue.
Good Luck,
(8{)}
.)
(Yosi)
If you're using a PLC like a WAGO 750-88x you've got about a meg to Play with. The 750-880 has an SD RAM slot so you can store up to 8G. Be warned, however, that if you're planning to do a lot of this, SD RAM has a limited number of writes, about 1M if I remember correctly.
If you're using the soft PLC the number of writes is not an issue.
Good Luck,
(8{)}
.)(Yosi)
Similar Topics
Hi all,
i tried to create a log file for a variable in my simulation program using Excel through DDE.
can i make Codesys record the variables...
I'm using a pressure sensor that outputs 4-20mA related to a range from 0-6 bar.
i want to connect this to my WAGO 750-485 module.
It's the...
Hi everyone,
I'm trying to go online with an IFM PLC over a serial connection, using CoDeSys. Things were working fine for a while; I managed to...
Hello,
I am using a Hitachi Micro EHV+ for a small project, and I wanted to have a Web visu, done with Codesys V3.5 SP13 Patch 2.
I test the...
Hello,
I have a requirement to manage the text alignment dynamically.
So, for example:
1. English Texts should be displayed from Left in...