Remmy A. Miho
Member
Hi guys I got failure in communication between my laptop and PLC, HITACHI EH-150. What should I do?
Communication failure
- Thread starter Remmy A. Miho
- Start date
Saffa
Member
I hope you've done the obvious - like:
Check your PLC is running.
Check your cables are connected both ends and not damaged.
What were you doing when it failed?
Check your PLC is running.
Check your cables are connected both ends and not damaged.
What were you doing when it failed?
Remmy A. Miho
Member
OP
thanks saffa!
Similar Topics
I have a CNC cutting equipment, all the components are Fanuc from the CNC CPU A02B-0307-B822, a PLC AIF01A and a panel i, on the panel i (operator...
I have a b&r 2010 PLC unit connected to B&R IPC 5000.
Communication between the PLC and IPC is failing as the two LEDs on the application...
Hi,
I am using P&F - WCS reader to read position of a trolley motion on a crane. Sometimes there is Ethernet communication failure error given by...
Hello everyone,
I have a GE IC695 CPE305 PLC with 3 remote panels. I am using ethernet to communicate with an IC695 PNC001 (in the main panel)...
Hello All,
I need urgent help please if you do not mind. I have a project that contains the following :
- one CPU S7-314
- one CP 343-1
- Four...