nguyenmauhien08118
Member
hi everyone. I have a problem with 231 parameters (0 encoder feedback). when engine control with encoder feedback, the value of the feedback as I do not understand, how to calculate such values. I have photographed some parameters as follows. In this example, I enter the speed down to the inverter to control motor is 100rpm. and using software to control drivecutive then display the values as shown. please help me on how to obtain the calculated values. please help me how to get the calculated value and internal value in the parameter value 231. thanks you so much!
http://s1066.photobucket.com/albums/u418/nguyenmauhien/
http://i1066.photobucket.com/albums/u418/nguyenmauhien/3-24-201210-41-44PM.png
http://i1066.photobucket.com/albums/u418/nguyenmauhien/3-24-201210-42-08PM.png
http://i1066.photobucket.com/albums/u418/nguyenmauhien/3-24-201210-03-33PM.png
http://i1066.photobucket.com/albums/u418/nguyenmauhien/3-24-201210-44-12PM.png
http://i1066.photobucket.com/albums/u418/nguyenmauhien/3-24-201211-00-53PM.png
http://s1066.photobucket.com/albums/u418/nguyenmauhien/
http://i1066.photobucket.com/albums/u418/nguyenmauhien/3-24-201210-41-44PM.png
http://i1066.photobucket.com/albums/u418/nguyenmauhien/3-24-201210-42-08PM.png
http://i1066.photobucket.com/albums/u418/nguyenmauhien/3-24-201210-03-33PM.png
http://i1066.photobucket.com/albums/u418/nguyenmauhien/3-24-201210-44-12PM.png
http://i1066.photobucket.com/albums/u418/nguyenmauhien/3-24-201211-00-53PM.png